Fea,cae,hypermesh,abaqus,fatigue,lsdyna,nastran,m 0942100371
Engineering - M.E/M.Tech/MS - 10+
Posted on: Sun, 23 Nov 2008, 09:19 PM
Job category: Engineering
Field: automotive - design
Education: M.E/M.Tech/MS
Experience: 10+ years
Preferred job location: Anywhere in India
Domain Expertise Computer Aided Engineering –
Durability & Fatigue - Closures & BIW
Technical Expertise Design of structures & analysis
Good knowledge in closures & body for durability.
Good analytical skills.
Total 9.5 years durability FEA experience
Employment Summary
From 10 May 2006 - Till date
INCAT (TATA Technologies LTD.) PUNE
Oct. 2001 – Apr 2006 Larsen & Toubro Ltd. e-Engineering Solutions.
June.1999 – Sep.2001 Defence Research & Development Establishment (Eng.)
Engineering Softwares
Preprocessor - ANSA, HYPERMESH
Solvers- ABAQUS/CAE,
LS-DYNA, Primer
ANSYS, Nastran
IDEAS (Simulation)
Fatigue - FATFE - ICE FLOW / n-code
Kinematic analysis - Design View
Current Role Description
Working as a team member in Chrysler rear wheel drive durability team
Key Projects -
Project Dynamic Door Slam Fatigue analysis & Over slam Analysis
Customer Chrysler, USA
Description Dynamic door slam is simulated with LSDYNA to check the endurance strength of the panels for given number of cycles. The door is tested for three UP, Mid & down glass positions. Subsequent iterations are carried out to fix the issues near low life area.
Role Team member
Tools Ansa & LS Dyna, FATFE n-code (Fatigue)
Location USA, Pune
Project Static Over-check Analysis for doors
Customer Chrysler, USA
Description Door is simulated against Over check stops at Hinges with ABAQUS to check the strength & sag set of the door. Such analysis is followed by subsequent redesigning.
Role Team Manager
Tools Ansa & ABAQUS
Location USA, Pune
Other Key Projects
Project Dynamic slam & Over slam of Hoods & Lift gates
Project Nonlinear sag set analysis
Project Nonlinear detent analysis for door
Project Door dent analysis
Project Liftgate, hood stiffness analysis
Project Dynamic overcheck analysis
Project Seam & spot weld fatigue analysis
Project Cradle fatigue & body durability analysis
Project Seal load compensation analysis
Project Door Sash Analysis
Customer Nissan, Japan
Description The door sash frame stiffness was evelutaed for given loading. The new design suggestions were given to control the excesive deformation in upper frame & stresses near beltline region.
Role Team Leader
Tools Hypermesh & ABAQUS
Location Baroda
Project Comparative study of Abaqus explicit and Lsdyna with fuel tank corner drop test
Customer Kenworth – Paccar trucks Ltd.
Description To evaluate the software capability in terms of accuracy, solution time, hardware compatibility, fuel tank drop test is carried out in Abaqus & LSdyna with 8 cups machine.
Role Team Leader/Member
Solution Environment SGI Altix –16 CPU, Linux
Tools Hypermesh ,ABAQUS,& LSDYNA
Location Baroda
Project Dynamic analysis & redesign of cabin structure of earth moving machinery for ROPS & FOPS test
Customer Komatsu, AGCO & VOLVO
Description In FOPS test, the rigid object impacts on the cabin structure due to gravity. The objective of analysis is to minimize the deflection of top roof of cabin at the impact region of object & thus ensuring the operator’s safety.
Sequential non-Linear static analysis is carried out for ROPS test (Roll over protective structure) as per European standards to check any intrusion of part in operator’s safety clearance zone.
Role Team Leader/Member
Tools Hypermesh, LSDYNA & ABAQUS
Location Baroda
Landline number: +91-80-4093 9235
Mobile number: +91-94210 03781
Syndicated from: 
|
|
|
